          Pac-Comm Micropower-2 modifications for 56KB

Remove or don't install the following IC chips.

U10  U11  U12  U13  U16  U17

Put in a 27C256 EPROM programed with KISS56 code in socket U2

Cut a piece (2 feet max) of ribbon cable (color coded prefered)
with 8 conductors.  This will connect the 56KB modem to the TNC.

Wire as follows.

Modem conn.	color	signal		Micropower-2 connection

1		BROWN  -RTS		J2-3  OR  D9-CATHODE
2		RED	RXD		U14-12
3		ORANGE	RXC		U14-13
4		YELLOW	TXD		U14-15
5		GREEN	TXC		U14-14
6		BLUE	GND		ANY GROUND POINT
7		VIOLET			NO CONNECTION
8		GREY	DCD		U14-19

END OF FILE
		 		